During this period, the LEDs around the knob will go on in a clockwise direction. You should then wait for a period of two minutes and press the resync button down for three seconds before releasing it. If a ColorLogic light controller is used to control the lights, you could easily push and then release the center knob to switch on the lights. Another convenient way is by entering and toggling relays while in service mode. Immediately, this process is completed, the back arrow should be clicked in to return to the dashboard. After that, you should try locating the resync icon which should be at the lower right corner. Then click on the body of water the lights are connected with. If the lights are controlled by an OmniLogic, you could try tapping in the right part of the dashboard, on the UCL light option. It is important to note that for this pattern to work, you have to take note of the timing.
After verification, you should turn the lights off for 2 minutes. If they are not, turn the switch back off for about 11 to 13 seconds. Then check if all the lights are in sync. Once the time is up, you should turn off the lights for about 11 to 13 seconds, after which you turn it back on immediately. If the lights are controlled by a simple switch, you could try turning on the lights and wait for a period of 60 seconds. There are many methods that can be used to resync the lights depending on the type of controller used and these methods are: There are times when the lights are no longer in sync and it can be very burdensome if not fixed immediately. This can be a disappointment as they expect the light to last so much longer without developing faults. These lights are actually pretty costly and buyers are generally dissatisfied when an issue arises with their lights. They brighten up the pool in the dark which is very essential in preventing pool accidents. Pool owners are quite familiar with the Hayward ColorLogic pool lights. This means that at no cost to you, we may earn a small commission for qualifying purchases. Disclosure: This post may contain affiliate links.
0 kommentar(er)
